Skip to content

Risers & Shelves

Display Step Riser

Stadium steps that lift the back row so every piece shows.

A stair-step riser with 1 to 5 tiers. Set the width, how deep and how tall each step is, and a small lip on each step so round things stay put. See it in 3D before we print it.

Good for

  • Figures and collectibles
  • Spice jars in a cabinet
  • Nail polish and makeup
  • Shot glasses and candles
3D render of the Display Step Riser

1. Pick a starting point

3D preview

Loading the 3D preview...

    Your price

    3. Order it

    Pricing your design...

    • Pick up in El Paso: pay a 50% deposit now and the rest when you pick it up at The Gizmo Grotto, 9109 Dyer Street, El Paso, TX 79924.
    • Ship it: pay in full now, plus shipping ($75+ ships free). US only.
    • You choose pickup or shipping in your cart. Everything is made to order, and a person checks every design before we print it.
    Looks good? See the price and order

    Save or share this design as a link. It keeps your choices.

    What you see is the actual part we print, built in your browser from your sizes. Every design gets a quick check by a person before we print it.

    2. Make it yours (optional)

    Options
    mm
    Left to right. Shelves start at 80 mm. Need it wider? Order two and set them side by side.
    mm
    A small raised edge so round things do not roll off. Step riser: on the front of every tier. Block: a rim around the top. Shelves: along the front edge. 0 is no lip.
    An open-bottom shell with 2.4 mm walls and ribs inside. It needs supports under every top, which adds a lot of print time, so it usually costs more than solid. Solid (the default) prints standing with no supports.
    Step riser
    How many steps, front to back. Each step is higher than the one in front of it.
    mm
    Front to back on each step. All the tiers together stay within 240 mm deep.
    mm
    How much higher each step is than the one in front. Low steps suit spice jars and nail polish, tall steps suit figures.
    mm
    Lifts the whole riser on a base. 0 means the first step sits right on the counter.
    A 30 mm wide channel under the middle, front to back, for a light cable or to lift it with a finger.
    Color
    Material

    Sun and heat: Standard PLA can soften or warp in hot sun or a hot car. For outdoor booths, sunny windows and anything that rides in a vehicle, pick ASA. ASA is about 35% more. ABS is available on any build.

    Timing
    Leave blank if there is no deadline.

    Ordering 100 or more? Ask for a business quote.

    Rather talk to us first? Send it as a request (no payment)

    No payment now. We check the design, then email you the price and a payment link.

    Photos, notes and delivery
    Photos of the item with a ruler or tape in view help a lot. Up to 6 files, 25 MB each.
    How we reach you
    Please give us at least one: an email or a phone number.
    What happens next
    We check your design.
    We send a price and payment link.
    You pay and we print.
    Usually within one business day

    About the display step riser

    A stair-step riser with 1 to 5 tiers. Set the width, how deep and how tall each step is, and a small lip on each step so round things stay put. See it in 3D before we print it.

    Every piece is GG-original, prints in one part up to 240 mm (about 9.4 in) wide, and is checked by a person before we print it in El Paso. See all our risers & shelves.

    Questions and answers

    How tall should each step be?

    Low steps, about 15 to 25 mm, suit spice jars and nail polish. Figures and collectibles look best with 35 to 50 mm, so the back row clears the heads in front.

    Solid or hollow?

    Solid is the default: it prints standing with no supports, so it is usually faster and costs less. Hollow is an open-bottom shell that needs supports inside, which adds print time.

    How wide can it be?

    Up to 240 mm (about 9.4 in) wide and deep, so every piece prints in one part on our printer. Need it wider? Order two and set them side by side.

    How do I get a price?

    Send your design from this page. A person checks it and replies, usually within one business day, with the price and a payment link. Nothing is charged until you approve.

    Will it hold up in the sun or a hot car?

    Standard PLA can soften or warp in hot sun or a hot car. For outdoor booths, sunny windows and anything that rides in a vehicle, choose ASA, our outdoor material, for about 35% more. ABS is also available on any build.

    Can I pick it up in El Paso, or do you ship?

    Both. Pick it up free at our shop at 9109 Dyer St, El Paso, TX 79924, or we ship anywhere in the United States ($7.50 flat, free on orders of $75 or more).

    More things you can design