Skip to content

Lighted Slab & Mineral Stand Builder

Design a stand for an agate slab, geode slice or mineral specimen and watch it update in 3D. Set the size, pegs, nameplate and an optional rear light, and see your price instantly.

3D preview

Loading the 3D preview...

150 x 50 x 55 mm5.91 x 1.97 x 2.17 in

Your price

$29.25each

1 x $29.25 = $29.25

Ships in about 5 business days. Includes Base with pegs, Nameplate.

Quantity pricing (each)
1 to 4$29.25
5 to 9$18.75
10 to 24$16.50
25 to 49$14.75
50+$13.25

This is the price we will charge, subject to a quick review by our team before we print. No payment now: we confirm by email and send a payment link.

Request this stand
Base
Base shape
Rectangle (square when width equals depth), oval or round.
mm
Left to right. The whole stand, including the light, stays within 150 mm.
mm
Front to back. With the light on, the maximum drops so the stand stays within 150 mm deep.
mm
Not counting the pegs. With a nameplate it must leave a flat front face of at least 12 mm below the fillet.
mm
Rounds the corners seen from above.
mm
Rounds the top edge all round. At least 1 mm of straight side always stays at the bottom.
Pegs
mm
Thickness of your slab or specimen where it touches the base. Sets the gap between the peg rows.
mm
Optional. Used only to suggest the back peg spacing.
mm
Extra room so the slab drops in easily.
3-point holds a slab best. Staggered 2 + 2 is the original prototype layout.
Peg shape
mm
mm
Centre to centre of the outer back pegs.
mm
Above the base top.
mm
Above the base top.
mm
Space from a peg to where the fillet starts.
Front & nameplate
°
Leans the front face back from vertical so the nameplate faces up a little.
One or two lines, up to 20 characters each. The text is sized to fill the plate.
Weight
Light
Adds the rear light cradle, merged into the base, and the LED puck.
Material & colour
Standard PLA can soften or warp in hot sun or a hot car. For outdoor booths, sunny windows and anything that rides in a vehicle, pick ASA. ASA and ABS are about 35% more.
Base colour
Nameplate colour
Letter colour
The letters are inlaid flush in the nameplate (0.6 mm), so the plate stays perfectly flat.
Quantity
Leave blank if there's no deadline.

Ordering 100 or more? Ask for a business quote.

Request this stand

Tell us where to send the confirmation. Your design and its price are saved with the request.

Photos, notes and delivery
Photos of the item with a ruler or tape in view help a lot. Up to 6 files, 25 MB each.
How we reach you
Please give us at least one: an email or a phone number.

No payment now. We review the design, then email you to confirm at the quoted price. Prefer something ready-made? See Mineral, Crystal & Sphere Stands.

A stand made to fit your slab or specimen

Show off an agate slab, geode slice or mineral specimen on a stand sized to it. Set the base, the slab width and thickness, the peg layout that holds it, a nameplate with flat inlaid letters in a second color (0.6 mm, never raised or sunk) and the colors, and add an optional LED light behind the slab so it glows.

The 3D preview and the price update as you design. Made for rock hounds, mineral collectors and rock shop displays.

Questions and answers

How do I measure my slab?

Measure the slab width along the bottom edge where it will sit, and its thickness there. The builder sizes the slot and pegs from those two numbers.

How does the nameplate text work?

Nameplate letters are flush: flat inlaid letters, 0.6 mm deep, in a second color, level with the face of the plate. They are never raised or sunk, so the plate stays flat and easy to dust.

Is the price final?

The price shown is an instant quote. A person gives every build a quick check before we make it and lets you know if anything needs to change.

Will it hold up in the sun or a hot car?

Standard PLA can soften or warp in hot sun or a hot car. For outdoor booths, sunny windows and anything that rides in a vehicle, choose ASA, our outdoor material, for about 35% more. ABS is also available on any build.

Can I pick it up in El Paso, or do you ship?

Both. Pick it up free at our shop at 9109 Dyer St, El Paso, TX 79924, or we ship anywhere in the United States ($7.50 flat, free on orders of $75 or more).

More things you can design